This 3" catless turbo downpipe is designed for selected Volkswagen GTI, Volkswagen Jetta, and Audi A3 2.0T applications. Built from T304 stainless steel, it features a 3" main pipe, welded flex section, V-band connection, and two oxygen sensor locations.
Designed as a direct replacement-style performance downpipe for compatible factory turbo exhaust layouts, it provides a freer-flowing exhaust path while retaining the key connections required for the listed applications.
Product Overview
A 3" catless turbo downpipe for listed VW GTI, VW Jetta, and Audi A3 2.0T applications. This product replaces the factory downpipe section and does not include a catalytic converter. It is not a catback exhaust, full turbo-back exhaust system, header set, or universal exhaust pipe.
Key Details
-
Product Type: 3" Catless Turbo Downpipe
-
Vehicle Applications: Selected VW GTI, VW Jetta, and Audi A3 2.0T
-
Material: T304 Stainless Steel
-
Main Pipe Diameter: 3.0"
-
Inlet Size: 3.25"
-
Outlet Size: 2.25"
-
Connection: V-Band
-
Flex Section: Welded Flex Pipe
-
O2 Sensor Locations: 2
-
Finish: Polished Stainless Steel
-
Installation: Professional installation recommended
Fitment
Confirm your vehicle against the applications below before ordering.
| Vehicle |
Year |
Engine |
Notes |
| Audi A3 |
2007–2011 |
2.0T |
Except 2007 Audi A3 Ambiente Hatchback |
| Volkswagen GTI MK5 |
2006–2007 |
2.0T |
Listed application |
| Volkswagen GTI |
2010 |
2.0T |
Listed application |
| Volkswagen Jetta MK5 |
2006–2008 |
2.0T |
Listed application |
| Volkswagen Jetta MK5 |
2010 |
2.0T |
2009 Jetta excluded |
Fitment Note:
This is an application-specific downpipe, not a universal exhaust component. Please confirm your exact vehicle year, model, turbo outlet connection, O2 sensor configuration, and downstream exhaust connection before installation.
Package Includes
- Catless downpipe section as shown
- Additional exhaust pipe section as shown
- Gasket
- V-band clamp
- Installation hardware
Please compare the received components with the product photos before installation.
Installation Notes
- Professional installation is recommended.
- No installation instructions are included.
- Test fit all exhaust components before final tightening.
- Confirm turbo outlet alignment, V-band connection, flex section position, O2 sensor locations, and downstream exhaust connection.
- Inspect surrounding components and underbody clearance before final installation.
- Older factory exhaust hardware may be rusted or seized and can increase installation difficulty.
- Compatible tuning or calibration may be required depending on vehicle setup.
- Check all exhaust joints for leaks after installation and recheck hardware after initial heat cycles.
Before You Buy
- Fits only the vehicle applications listed in the Fitment table above.
- This is a 3" catless turbo downpipe, not a catback exhaust, full turbo-back system, header set, catalytic converter, or universal exhaust pipe.
- This product does not include a catalytic converter.
- Vehicle-specific tuning, calibration, or sensor-related solutions may be required.
- Check local emissions and road-use regulations before purchase and installation.
- Professional installation is recommended.