{"title":"Toyota","description":"","products":[{"product_id":"cold-air-intake-kit-with-heat-shield-silver-filter-for-2009-2017-toyota-corolla-2016-2017-scion-im-1-8l","title":"Cold Air Intake Kit with Heat Shield \u0026 Silver Filter for 2009-2017 Toyota Corolla, 2016-2017 Scion iM 1.8L","description":"\u003cp\u003eThis high-performance Cold Air Intake Kit delivers 7-10% more horsepower and 6-8% increased torque by channeling cooler, denser air to your engine. Its polished T-304 aluminum pipe maximizes airflow while producing a deep sporty sound, and the reusable dry-filter requires no oil - simply wash with soap and water every 5,000 miles. The carbon-black powder-coated heat shield protects from debris and engine heat, and installation is straightforward using factory points with all hardware included. Experience sharper throttle response and explosive power gains with this complete intake upgrade.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCondition: 100% Brand New\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: T-304 aluminum\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eType: air intake kit\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThis intake system resists corrosion and maintains a sleek, aggressive look under your hood\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThis cold air intake kit delivers +7-10% horsepower \u0026amp; +6-8% torque, improving throttle response and explosive power\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFeatures a high-flow washable \u0026amp; reusable cone air filter that draws more cold air while blocking dirt and debris for long-lasting engine protection\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe steel heat shield with carbon-black powder coating keeps hot underhood air away, ensuring cooler air intake \u0026amp; better combustion efficiency\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2009-2017 Toyota Corolla with 1.8L Engine\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2016-2017 Scion iM with 1.8L Engine\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFits Manual \u0026amp; Automatic Transmission\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e \u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\u003clink rel=\"stylesheet\" href=\"https:\/\/fonts.googleapis.com\/css2?family=Lato:wght@400;500;600\u0026amp;display=swap\"\u003e\u003c\/p\u003e\n\u003cstyle\u003e\n        .chevrolet-specs-container {\n            width: 100%;\n            margin: 0;\n            padding: 0;\n            isolation: isolate;\n        }\n        \n        .chevrolet-table-wrapper {\n            overflow-x: auto;\n            background: #fff;\n            border-radius: 8px;\n            box-shadow: 0 2px 8px rgba(0, 0, 0, 0.1);\n            -webkit-overflow-scrolling: touch;\n        }\n        \n        .chevrolet-specs-table {\n            width: 100%;\n            border-collapse: collapse;\n            font-family: \"Lato\", -apple-system, BlinkMacSystemFont, \"Segoe UI\", Roboto, Helvetica, Arial, sans-serif;\n            font-size: 12px;\n            line-height: 1.3;\n            table-layout: fixed;\n            min-width: 280px;\n            color: #737272;\n        }\n        \n        .chevrolet-specs-table thead {\n            background-color: #2c3e50;\n            color: #fff;\n        }\n        \n        .chevrolet-specs-table th {\n            padding: 8px 10px;\n            text-align: left;\n            font-weight: 600;\n            font-size: 12px;\n        }\n        \n        .chevrolet-specs-table td {\n            padding: 8px 10px;\n            border-bottom: 1px solid #eaeaea;\n            word-wrap: break-word;\n        }\n        \n        .chevrolet-specs-table tbody tr:last-child td {\n            border-bottom: none;\n        }\n        \n        .chevrolet-year {\n            color: #737272;\n            font-weight: 500;\n            width: 20%;\n        }\n        \n        .chevrolet-engine {\n            color: #737272;\n            font-weight: 500;\n            width: 30%;\n        }\n        \n        .chevrolet-specs-table th:first-child,\n        .chevrolet-specs-table td:first-child {\n            width: 50%;\n        }\n        \n        @media (max-width: 480px) {\n            .chevrolet-specs-table {\n                font-size: 11px;\n            }\n            \n            .chevrolet-specs-table th,\n            .chevrolet-specs-table td {\n                padding: 6px 8px;\n            }\n            \n            .chevrolet-specs-table th:first-child,\n            .chevrolet-specs-table td:first-child {\n                width: 45%;\n            }\n            \n            .chevrolet-year {\n                width: 25%;\n            }\n            \n            .chevrolet-engine {\n                width: 30%;\n            }\n        }\n        \n        @media (max-width: 360px) {\n            .chevrolet-specs-table {\n                font-size: 10px;\n            }\n            \n            .chevrolet-specs-table th,\n            .chevrolet-specs-table td {\n                padding: 5px 6px;\n            }\n        }\n    \u003c\/style\u003e\n\u003cdiv class=\"chevrolet-specs-container\"\u003e\n\u003cdiv class=\"chevrolet-table-wrapper\"\u003e\n\u003ctable class=\"chevrolet-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eVEHICLE NAME\u003c\/th\u003e\n\u003cth\u003eYEAR\u003c\/th\u003e\n\u003cth\u003eENGINE\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eToyota Corolla\u003c\/td\u003e\n\u003ctd class=\"chevrolet-year\"\u003e2009-2017\u003c\/td\u003e\n\u003ctd class=\"chevrolet-engine\"\u003e1.8L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScion iM\u003c\/td\u003e\n\u003ctd class=\"chevrolet-year\"\u003e2016-2017\u003c\/td\u003e\n\u003ctd class=\"chevrolet-engine\"\u003e1.8L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"XKVracing","offers":[{"title":"Default Title","offer_id":47887646982314,"sku":"XKV81116","price":131.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/9506\/3722\/files\/0_0022_MT020086-81116SAS_Main_image_no_color_box.webp?v=1770095141"},{"product_id":"80mm-j-pipe-delete-kit-intake-pipe-for-1992-2001-toyota-chaser-markii-cresta-jzx90-jzx100-1jz-turbo-engine","title":"80mm J-Pipe Delete Intake Pipe Boot Kit for 1992-2001 Toyota Chaser MarkII Cresta JZX90 JZX100 1JZ Turbo Engine","description":"\u003cp\u003eUnleash the airflow potential of your 1JZ-GTE! This 80mm J-Pipe Delete Kit is a precision-engineered, direct-fit intake pipe that replaces the restrictive factory unit on your JZX90\/JZX100 Chaser. Constructed from high-quality alloy for durability and performance, this 100% new kit is a straightforward bolt-on upgrade. Please note: Professional installation is highly recommended for optimal results.\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCondition: 100% Brand New\u003cbr\u003eMaterial: Aluminum\u003cbr\u003eFinish: Polished\u003cbr\u003ePipe Thickness: 1.8mm \/ 0.07 inch\u003cbr\u003eInlet Size (OD): 80mm \/ 3.125 inch\u003cbr\u003eFlange size : Bolt on Stock Chaser 1JZ turbo\u003cbr\u003eInstallation Manual Is NOT Included\u003cbr\u003eProfessional Installation Is Highly Recommended\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1992-2001 Toyota MarkII Chaser \/ Cresta JZX90 , JZX100 - 1JZ Turbo Engine\u003c\/p\u003e","brand":"XKVracing","offers":[{"title":"Default Title","offer_id":47887647834282,"sku":"XKV81102","price":108.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/9506\/3722\/files\/0_0036_MT020063-81102SAS_Main_image_no_color_box.webp?v=1770085409"},{"product_id":"stainless-steel-exhaust-header-for-1990-1999-toyota-celica-gt-gts-st184-st204-2-2l-i4-dohc-5s-fe-engine","title":"Stainless Steel Exhaust Header for 1990-1999 Toyota Celica GT\/ GTS (ST184\/ ST204) 2.2L I4 DOHC 5S-FE Engine","description":"\u003cp\u003eExperience the perfect blend of quality engineering and exceptional value with these high-performance headers. Manufactured from durable T-304 stainless steel with precision CNC-machined flanges and TIG\/MIG welded construction, they deliver superior durability and flow characteristics. Computerized mandrel bending technology ensures smooth exhaust airflow for improved scavenging and reduced back pressure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eMade of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e100% brand new\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eSurface: Mirror Polish\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMaterial: Stainless Steel\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHeader Inlet \/ Outlet Size (IN): 1.625\" X 1.50\" \/ 2.25\"\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eProfessional installation is highly recommended\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cmeta charset=\"\"\u003eFitment:\u003c\/strong\u003e\u003cspan\u003e\u003ca\u003e\u003cu\u003e\u003cspan class=\"\"\u003e\u003c\/span\u003e\u003c\/u\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1990-1999 Toyota Celica GT\/ GTS (ST184\/ ST204)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFits 2.2L I4 DOHC 5S-FE Engine ONLY\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDoes NOT Fit 1.6L\/ 2.0L ST Models and 93 GTS 2.0L Model\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XKVracing","offers":[{"title":"Default Title","offer_id":47887649800362,"sku":"XKV11231","price":132.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/9506\/3722\/files\/0_0008_MT001285_11231SAS_Main_Image_No_Color_Box.webp?v=1770011910"},{"product_id":"stainless-exhaust-manifold-header-for-toyota-celica-corolla-matrix-00-08-2zz-ge","title":"Stainless Exhaust Manifold Header for Toyota Celica Corolla Matrix 00-08 2ZZ-GE","description":"\u003cul\u003e\n\u003cli\u003eItem is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e100% New,\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNever used or installed.\u003c\/li\u003e\n\u003cli class=\"style69\"\u003eO2 Sensor locations: 1\u003c\/li\u003e\n\u003cli class=\"style69\"\u003eHeader features 4-1 piping design design.\u003c\/li\u003e\n\u003cli class=\"style69\"\u003e1.5\" Inlet\u003c\/li\u003e\n\u003cli class=\"style69\"\u003e2.5\" OD Outlet\u003c\/li\u003e\n\u003cli class=\"style69\"\u003eCNC machine flanges with TIG and MIG welded construction.\u003c\/li\u003e\n\u003cli class=\"style69\"\u003eMade from Stainless Steel.\u003c\/li\u003e\n\u003cli class=\"style69\"\u003eHP\/Torque Gains of 5-10\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"style69\"\u003eProduct does not come with installation instructions, please refer to a shop\/factory manual for installation\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"style69\"\u003efitment\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e \u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\u003clink rel=\"stylesheet\" href=\"https:\/\/fonts.googleapis.com\/css2?family=Lato:wght@400;500;600\u0026amp;display=swap\"\u003e\u003c\/p\u003e\n\u003cstyle\u003e\n        .specs-container {\n            width: 100%;\n            margin: 0;\n            padding: 0;\n            isolation: isolate;\n        }\n        \n        .table-wrapper {\n            overflow-x: auto;\n            background: #fff;\n            border-radius: 8px;\n            box-shadow: 0 2px 8px rgba(0, 0, 0, 0.1);\n            -webkit-overflow-scrolling: touch;\n        }\n        \n        .specs-table {\n            width: 100%;\n            border-collapse: collapse;\n            font-family: \"Lato\", -apple-system, BlinkMacSystemFont, \"Segoe UI\", Roboto, Helvetica, Arial, sans-serif;\n            font-size: 12px;\n            line-height: 1.3;\n            table-layout: fixed;\n            min-width: 280px;\n            color: #737272;\n        }\n        \n        .specs-table thead {\n            background-color: #2c3e50;\n            color: #fff;\n        }\n        \n        .specs-table th {\n            padding: 8px 10px;\n            text-align: left;\n            font-weight: 600;\n            font-size: 12px;\n        }\n        \n        .specs-table td {\n            padding: 8px 10px;\n            border-bottom: 1px solid #eaeaea;\n            word-wrap: break-word;\n        }\n        \n        .specs-table tbody tr:last-child td {\n            border-bottom: none;\n        }\n        \n        .year {\n            color: #737272;\n            font-weight: 500;\n            width: 20%;\n        }\n        \n        .info {\n            color: #737272;\n            font-weight: 500;\n            width: 30%;\n        }\n        \n        .specs-table th:first-child,\n        .specs-table td:first-child {\n            width: 50%;\n        }\n        \n        @media (max-width: 480px) {\n            .specs-table {\n                font-size: 11px;\n            }\n            \n            .specs-table th,\n            .specs-table td {\n                padding: 6px 8px;\n            }\n            \n            .specs-table th:first-child,\n            .specs-table td:first-child {\n                width: 45%;\n            }\n            \n            .year {\n                width: 25%;\n            }\n            \n            .info {\n                width: 30%;\n            }\n        }\n        \n        @media (max-width: 360px) {\n            .specs-table {\n                font-size: 10px;\n            }\n            \n            .specs-table th,\n            .specs-table td {\n                padding: 5px 6px;\n            }\n        }\n    \u003c\/style\u003e\n\u003cdiv class=\"specs-container\"\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003ctable class=\"specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMake, Model\u003c\/th\u003e\n\u003cth\u003eYear(s)\u003c\/th\u003e\n\u003cth\u003eAdditional Info\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eToyota Celica GTS\u003c\/td\u003e\n\u003ctd class=\"year\"\u003e2000, 2001, 2002, 2003, 2004, 2005\u003c\/td\u003e\n\u003ctd class=\"info\"\u003e2ZZ-GE ENGINES ONLY\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eToyota Corolla XRS\u003c\/td\u003e\n\u003ctd class=\"year\"\u003e2005, 2005\u003c\/td\u003e\n\u003ctd class=\"info\"\u003e2ZZ-GE ENGINES ONLY\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eToyota Matrix CRX\u003c\/td\u003e\n\u003ctd class=\"year\"\u003e2003, 2004, 2005, 2006, 2007, 2008\u003c\/td\u003e\n\u003ctd class=\"info\"\u003e2ZZ-GE ENGINES ONLY\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"XKVracing","offers":[{"title":"Default Title","offer_id":47887650357418,"sku":"XKV11242","price":168.16,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/9506\/3722\/files\/0_0004_MT001313_11242SAS_Main_Image_No_Color_Box.webp?v=1770002621"},{"product_id":"stainless-performance-exhaust-manifold-header-for-scion-tc-2011-2016-2-5l-dohc","title":"Stainless Performance Exhaust Manifold Header for Scion tC 2011-2016 2.5L DOHC","description":"\u003cdiv class=\"xkv-product-description\"\u003e\n\n  \u003cp\u003e\n    This stainless performance exhaust manifold header is designed for listed 2011–2016 Scion tC 2.5L DOHC applications. It is intended as an exhaust manifold \/ header replacement or upgrade-style component for compatible Scion tC exhaust setups.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    Built with stainless steel construction as listed, this exhaust manifold header is designed to support a secure exhaust path where compatible. Final fitment, sound, exhaust sealing, drivability, and performance results may vary depending on vehicle condition, exhaust layout, O2 sensor setup, catalytic converter \/ downstream connection, installation quality, emissions setup, and supporting components.\n  \u003c\/p\u003e\n\n  \u003ch3\u003eProduct Overview\u003c\/h3\u003e\n  \u003cp\u003e\n    This product is an exhaust manifold header for compatible Scion tC 2.5L DOHC applications. It is not a catback exhaust system, downpipe, turbo manifold, full exhaust system, catalytic converter, or universal header kit. Please verify your exact model year, engine configuration, exhaust manifold flange layout, O2 sensor position, downstream exhaust connection, and emissions requirements before purchase.\n  \u003c\/p\u003e\n\n  \u003ch3\u003eKey Details\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Listed 2011–2016 Scion tC 2.5L DOHC applications\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Exhaust Manifold Header \/ Performance Header\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless steel as listed\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e 2.5L DOHC application as listed\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Designed for compatible factory-style exhaust manifold \/ downstream exhaust connection where fitment matches\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSensor \/ Emissions Setup:\u003c\/strong\u003e Verify O2 sensor position, catalytic converter connection, and emissions configuration before installation\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation highly recommended\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eInstruction:\u003c\/strong\u003e No installation instructions included unless otherwise stated on the product page\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eUse Case:\u003c\/strong\u003e Off-road, racing, or closed-course use where emissions laws apply\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eFitment\u003c\/h3\u003e\n  \u003cp\u003e\n    Please use the table below to quickly confirm the main vehicle application listed for this exhaust manifold header. Before ordering, verify your exact model year, engine, flange layout, O2 sensor position, downstream exhaust connection, and emissions setup.\n  \u003c\/p\u003e\n\n  \u003cdiv class=\"xkv-fitment-table-wrap\"\u003e\n    \u003ctable class=\"xkv-fitment-table\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n          \u003cth\u003eVehicle Name\u003c\/th\u003e\n          \u003cth\u003eYear\u003c\/th\u003e\n          \u003cth\u003eEngine\u003c\/th\u003e\n          \u003cth\u003eNotes\u003c\/th\u003e\n        \u003c\/tr\u003e\n      \u003c\/thead\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eScion tC\u003c\/td\u003e\n          \u003ctd\u003e2011–2016\u003c\/td\u003e\n          \u003ctd\u003e2.5L DOHC\u003c\/td\u003e\n          \u003ctd\u003eVerify exhaust manifold flange layout, O2 sensor position, downstream exhaust connection, and emissions setup\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"xkv-fitment-note\"\u003e\n    \u003cstrong\u003eFitment Note:\u003c\/strong\u003e This table is based on the fitment information currently listed for this product. Please verify your exact 2011–2016 Scion tC model year, 2.5L DOHC engine configuration, exhaust manifold flange layout, O2 sensor position, catalytic converter \/ downstream exhaust connection, and emissions setup before purchase. Do not rely on the previous Ford 5.4L content that may have appeared on this page.\n  \u003c\/div\u003e\n\n  \u003ch3\u003ePackage Includes\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eExhaust manifold header component as shown\u003c\/li\u003e\n    \u003cli\u003eGaskets, hardware, bolts, or additional accessories included only if shown or listed\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\n    Please review the product photos and listing details before installation. Confirm all included components, flanges, gaskets, fasteners, and connection requirements against the received package before beginning installation.\n  \u003c\/p\u003e\n\n  \u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eProfessional installation is highly recommended.\u003c\/li\u003e\n    \u003cli\u003eNo installation instructions are included unless otherwise stated on the product page.\u003c\/li\u003e\n    \u003cli\u003eTest fit the header before final tightening.\u003c\/li\u003e\n    \u003cli\u003eVerify cylinder head flange alignment, gasket seating, O2 sensor position, catalytic converter \/ downstream exhaust connection, and engine bay clearance before installation.\u003c\/li\u003e\n    \u003cli\u003eCheck clearance around the engine bay, subframe, steering components, wiring, heat shields, sensors, and surrounding exhaust components.\u003c\/li\u003e\n    \u003cli\u003eOld, rusted, or seized factory hardware may increase installation difficulty.\u003c\/li\u003e\n    \u003cli\u003eModified exhaust systems, previous repairs, or non-factory configurations may require additional adjustment or compatible components.\u003c\/li\u003e\n    \u003cli\u003eInspect all exhaust connections for leaks after installation and recheck fasteners after initial heat cycles where appropriate.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eBefore You Buy\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eThis product is intended for listed 2011–2016 Scion tC 2.5L DOHC applications only.\u003c\/li\u003e\n    \u003cli\u003eThis is an exhaust manifold header, not a catback exhaust system, downpipe, turbo manifold, full exhaust system, catalytic converter, or universal header kit.\u003c\/li\u003e\n    \u003cli\u003ePlease verify your exact model year, engine configuration, flange layout, O2 sensor position, catalytic converter \/ downstream exhaust connection, and emissions setup before purchase.\u003c\/li\u003e\n    \u003cli\u003eThis product may alter the factory exhaust or emissions-related configuration depending on the vehicle setup.\u003c\/li\u003e\n    \u003cli\u003eThis product is intended for off-road, racing, or closed-course use where emissions laws apply.\u003c\/li\u003e\n    \u003cli\u003eThis product is not represented as street legal, emissions-compliant, CARB-compliant, or legal for public road use unless explicitly stated.\u003c\/li\u003e\n    \u003cli\u003ePerformance gains, sound changes, exhaust flow changes, fitment, clearance, and drivability results are not guaranteed and may vary by setup.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n\u003c\/div\u003e\n\n\u003cstyle\u003e\n  .xkv-product-description {\n    font-family: Arial, sans-serif;\n    line-height: 1.5;\n    color: #333;\n  }\n\n  .xkv-product-description h3 {\n    margin-top: 28px;\n    margin-bottom: 12px;\n    color: #062E94;\n    font-size: 20px;\n    font-weight: 700;\n  }\n\n  .xkv-product-description p {\n    margin-bottom: 14px;\n  }\n\n  .xkv-product-description ul {\n    margin: 0 0 18px 20px;\n    padding: 0;\n  }\n\n  .xkv-product-description li {\n    margin-bottom: 8px;\n  }\n\n  .xkv-fitment-table-wrap {\n    width: 100%;\n    overflow-x: auto;\n    margin: 18px 0 20px;\n    border: 1px solid #d9dde5;\n    border-radius: 8px;\n    box-shadow: 0 2px 10px rgba(0,0,0,0.04);\n  }\n\n  .xkv-fitment-table {\n    width: 100%;\n    min-width: 720px;\n    border-collapse: collapse;\n    background: #fff;\n  }\n\n  .xkv-fitment-table th,\n  .xkv-fitment-table td {\n    border-right: 1px solid #e0e0e0;\n    border-top: 1px solid #e5e5e5;\n    padding: 13px 14px;\n    font-size: 15px;\n    line-height: 1.45;\n    text-align: left;\n    color: #444;\n  }\n\n  .xkv-fitment-table th:last-child,\n  .xkv-fitment-table td:last-child {\n    border-right: none;\n  }\n\n  .xkv-fitment-table thead th {\n    background-color: #2f4053;\n    color: #ffffff;\n    font-weight: 700;\n    text-transform: uppercase;\n    border-top: none;\n    border-right: 1px solid #1f2b39;\n  }\n\n  .xkv-fitment-table thead th:last-child {\n    border-right: none;\n  }\n\n  .xkv-fitment-table tbody tr:nth-child(even) {\n    background-color: #fafafa;\n  }\n\n  .xkv-fitment-table tbody tr:hover {\n    background-color: #f5f8fc;\n  }\n\n  .xkv-fitment-note {\n    margin: 14px 0 24px;\n    padding: 14px 16px;\n    background-color: #f8fafd;\n    border-left: 4px solid #062E94;\n    color: #333;\n    font-size: 14px;\n    line-height: 1.65;\n  }\n\n  @media (max-width: 768px) {\n    .xkv-product-description h3 {\n      font-size: 18px;\n    }\n\n    .xkv-product-description p,\n    .xkv-product-description li,\n    .xkv-fitment-table th,\n    .xkv-fitment-table td {\n      font-size: 14px;\n    }\n\n    .xkv-fitment-table th,\n    .xkv-fitment-table td {\n      padding: 11px 12px;\n    }\n\n    .xkv-fitment-table {\n      min-width: 680px;\n    }\n\n    .xkv-fitment-note {\n      font-size: 13px;\n      line-height: 1.6;\n    }\n  }\n\n  @media (max-width: 480px) {\n    .xkv-product-description h3 {\n      font-size: 17px;\n    }\n\n    .xkv-fitment-table {\n      min-width: 660px;\n    }\n  }\n\u003c\/style\u003e","brand":"XKVracing","offers":[{"title":"Default Title","offer_id":47887650390186,"sku":"XKV11241","price":216.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/9506\/3722\/files\/0_0005_MT001312_11241SAS_Main_Image_No_Color_Box.webp?v=1770002560"},{"product_id":"exhaust-manifold-header-for-2013-2020-subaru-brz-toyota-86-2-0l","title":"Exhaust Manifold Header for 2013-2020 Subaru BRZ Toyota 86 2.0L","description":"\u003cdiv class=\"pr-description\"\u003e\n\u003cp\u003eThis exhaust manifold replaces the restrictive OEM manifold with a stainless tubular version which has a much higher flow and releases more power from the engine. This is an un-equal length manifold so it will make the car sound more like an Impreza.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWill fit all GT86 or BRZ made after 2012\u003c\/li\u003e\n\u003cli\u003eMade of high quality T304 stainless steel material\u003c\/li\u003e\n\u003cli\u003eCNC machine flanges with TIG and MIG welded construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003efitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e \u003cmeta name=\"viewport\" content=\"width=device-width, initial-scale=1.0\"\u003e\u003clink href=\"https:\/\/fonts.googleapis.com\/css2?family=Lato:wght@400;500;600\u0026amp;display=swap\" rel=\"stylesheet\"\u003e\u003c\/p\u003e\n\u003cstyle\u003e\n        .chevrolet-specs-container {\n            width: 100%;\n            margin: 0;\n            padding: 0;\n            isolation: isolate;\n        }\n        \n        .chevrolet-table-wrapper {\n            overflow-x: auto;\n            background: #fff;\n            border-radius: 8px;\n            box-shadow: 0 2px 8px rgba(0, 0, 0, 0.1);\n            -webkit-overflow-scrolling: touch;\n        }\n        \n        .chevrolet-specs-table {\n            width: 100%;\n            border-collapse: collapse;\n            font-family: \"Lato\", -apple-system, BlinkMacSystemFont, \"Segoe UI\", Roboto, Helvetica, Arial, sans-serif;\n            font-size: 12px;\n            line-height: 1.3;\n            table-layout: fixed;\n            min-width: 280px;\n            color: #737272;\n        }\n        \n        .chevrolet-specs-table thead {\n            background-color: #2c3e50;\n            color: #fff;\n        }\n        \n        .chevrolet-specs-table th {\n            padding: 8px 10px;\n            text-align: left;\n            font-weight: 600;\n            font-size: 12px;\n        }\n        \n        .chevrolet-specs-table td {\n            padding: 8px 10px;\n            border-bottom: 1px solid #eaeaea;\n            word-wrap: break-word;\n        }\n        \n        .chevrolet-specs-table tbody tr:last-child td {\n            border-bottom: none;\n        }\n        \n        .chevrolet-year {\n            color: #737272;\n            font-weight: 500;\n            width: 20%;\n        }\n        \n        .chevrolet-engine {\n            color: #737272;\n            font-weight: 500;\n            width: 30%;\n        }\n        \n        .chevrolet-specs-table th:first-child,\n        .chevrolet-specs-table td:first-child {\n            width: 50%;\n        }\n        \n        @media (max-width: 480px) {\n            .chevrolet-specs-table {\n                font-size: 11px;\n            }\n            \n            .chevrolet-specs-table th,\n            .chevrolet-specs-table td {\n                padding: 6px 8px;\n            }\n            \n            .chevrolet-specs-table th:first-child,\n            .chevrolet-specs-table td:first-child {\n                width: 45%;\n            }\n            \n            .chevrolet-year {\n                width: 25%;\n            }\n            \n            .chevrolet-engine {\n                width: 30%;\n            }\n        }\n        \n        @media (max-width: 360px) {\n            .chevrolet-specs-table {\n                font-size: 10px;\n            }\n            \n            .chevrolet-specs-table th,\n            .chevrolet-specs-table td {\n                padding: 5px 6px;\n            }\n        }\n    \u003c\/style\u003e\n\u003cdiv class=\"chevrolet-specs-container\"\u003e\n\u003cdiv class=\"chevrolet-table-wrapper\"\u003e\n\u003ctable class=\"chevrolet-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eVEHICLE NAME\u003c\/th\u003e\n\u003cth\u003eYEAR\u003c\/th\u003e\n\u003cth\u003eENGINE\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eScion FR-S\u003c\/td\u003e\n\u003ctd class=\"chevrolet-year\"\u003e2013~2016\u003c\/td\u003e\n\u003ctd class=\"chevrolet-engine\"\u003e2.0L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSubaru BRZ\u003c\/td\u003e\n\u003ctd class=\"chevrolet-year\"\u003e2013~2020\u003c\/td\u003e\n\u003ctd class=\"chevrolet-engine\"\u003e2.0L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eToyota 86\u003c\/td\u003e\n\u003ctd class=\"chevrolet-year\"\u003e2017~2020\u003c\/td\u003e\n\u003ctd class=\"chevrolet-engine\"\u003e2.0L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"XKVracing","offers":[{"title":"Default Title","offer_id":47887653306538,"sku":"XKV11204","price":170.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/9506\/3722\/files\/0_0028_MT001238_11204SAS_Main_Image_No_Color_Box.webp?v=1769847408"},{"product_id":"1985-1989-axle-back-catback-exhaust-system-2-dual-muffler-tip-for-85-89-toyota-mr2-w10-sw-4a-ge-4age","title":"Axle Back Catback Exhaust System 2\" Dual Muffler Tip for 1985-1989 Toyota MR2 W10 SW 4A-GE 4AGE","description":"\u003cp\u003eExperience the perfect blend of quality engineering and exceptional value with these high-performance catback system. Manufactured from durable T-304 stainless steel with precision CNC-machined flanges and TIG\/MIG welded construction, they deliver superior durability and flow characteristics. Computerized mandrel bending technology ensures smooth exhaust airflow for improved scavenging and reduced back pressure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade of high quality T-304 stainless steel\u003c\/li\u003e\n\u003cli\u003eDirect Bolt-On Installation\u003c\/li\u003e\n\u003cli\u003e2\" Muffler Exhaust Tip\u003c\/li\u003e\n\u003cli\u003eGaskets and Hardware Included\u003c\/li\u003e\n\u003cli\u003eEasy Installation\u003c\/li\u003e\n\u003cli\u003eProfessional Installation is Highly Recommended\u003c\/li\u003e\n\u003cli\u003eInstallation Instruction is not Included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cmeta charset=\"\"\u003eFitment:\u003c\/strong\u003e\u003cspan\u003e\u003ca\u003e\u003cu\u003e\u003cspan class=\"\"\u003e\u003c\/span\u003e\u003c\/u\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e1985-1989 Toyota MR2 w\/ Quad W10 SW 4A-GE.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e \u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\u003clink rel=\"stylesheet\" href=\"https:\/\/fonts.googleapis.com\/css2?family=Lato:wght@400;500;600\u0026amp;display=swap\"\u003e\u003c\/p\u003e\n\u003cstyle\u003e\n.chevrolet-specs-container {\nwidth: 100%;\nmargin: 0;\npadding: 0;\nisolation: isolate;\n}\n\n.chevrolet-table-wrapper {\noverflow-x: auto;\nbackground: #fff;\nborder-radius: 8px;\nbox-shadow: 0 2px 8px rgba(0, 0, 0, 0.1);\n-webkit-overflow-scrolling: touch;\n}\n\n.chevrolet-specs-table {\nwidth: 100%;\nborder-collapse: collapse;\nfont-family: \"Lato\", -apple-system, BlinkMacSystemFont, \"Segoe UI\", Roboto, Helvetica, Arial, sans-serif;\nfont-size: 12px;\nline-height: 1.3;\ntable-layout: fixed;\nmin-width: 280px;\ncolor: #737272;\n}\n\n.chevrolet-specs-table thead {\nbackground-color: #2c3e50;\ncolor: #fff;\n}\n\n.chevrolet-specs-table th {\npadding: 8px 10px;\ntext-align: left;\nfont-weight: 600;\nfont-size: 12px;\n}\n\n.chevrolet-specs-table td {\npadding: 8px 10px;\nborder-bottom: 1px solid #eaeaea;\nword-wrap: break-word;\n}\n\n.chevrolet-specs-table tbody tr:last-child td {\nborder-bottom: none;\n}\n\n.chevrolet-year {\ncolor: #737272;\nfont-weight: 500;\nwidth: 20%;\n}\n\n.chevrolet-engine {\ncolor: #737272;\nfont-weight: 500;\nwidth: 30%;\n}\n\n.chevrolet-specs-table th:first-child,\n.chevrolet-specs-table td:first-child {\nwidth: 50%;\n}\n\n@media (max-width: 480px) {\n.chevrolet-specs-table {\nfont-size: 11px;\n}\n\n.chevrolet-specs-table th,\n.chevrolet-specs-table td {\npadding: 6px 8px;\n}\n\n.chevrolet-specs-table th:first-child,\n.chevrolet-specs-table td:first-child {\nwidth: 45%;\n}\n\n.chevrolet-year {\nwidth: 25%;\n}\n\n.chevrolet-engine {\nwidth: 30%;\n}\n}\n\n@media (max-width: 360px) {\n.chevrolet-specs-table {\nfont-size: 10px;\n}\n\n.chevrolet-specs-table th,\n.chevrolet-specs-table td {\npadding: 5px 6px;\n}\n}\n\u003c\/style\u003e\n\u003cdiv class=\"chevrolet-specs-container\"\u003e\n\u003cdiv class=\"chevrolet-table-wrapper\"\u003e\n\u003ctable class=\"chevrolet-specs-table\" style=\"width: 99.9801%;\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"width: 49.8121%;\"\u003eVEHICLE\u003c\/th\u003e\n\u003cth style=\"width: 11.6493%;\"\u003eYEAR\u003c\/th\u003e\n\u003cth style=\"width: 38.5211%;\"\u003eENGINE\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.8121%;\"\u003eToyota MR2 GT Coupe 2-Door\u003c\/td\u003e\n\u003ctd class=\"chevrolet-year\" style=\"width: 11.6493%;\"\u003e1989\u003c\/td\u003e\n\u003ctd class=\"chevrolet-engine\" style=\"width: 38.5211%;\"\u003e1.6L 1587CC l4 GAS DOHC Naturally Aspirated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.8121%;\"\u003eToyota MR2 Super Charged Coupe 2-Door\u003c\/td\u003e\n\u003ctd class=\"chevrolet-year\" style=\"width: 11.6493%;\"\u003e1989\u003c\/td\u003e\n\u003ctd class=\"chevrolet-engine\" style=\"width: 38.5211%;\"\u003e1.6L 1587CC l4 GAS DOHC Supercharged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.8121%;\"\u003eToyota MR2 GT Coupe 2-Door\u003c\/td\u003e\n\u003ctd class=\"chevrolet-year\" style=\"width: 11.6493%;\"\u003e1988\u003c\/td\u003e\n\u003ctd class=\"chevrolet-engine\" style=\"width: 38.5211%;\"\u003e1.6L 1587CC l4 GAS DOHC Naturally Aspirated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.8121%;\"\u003eToyota MR2 Super Charged Coupe 2-Door\u003c\/td\u003e\n\u003ctd class=\"chevrolet-year\" style=\"width: 11.6493%;\"\u003e1988\u003c\/td\u003e\n\u003ctd class=\"chevrolet-engine\" style=\"width: 38.5211%;\"\u003e1.6L 1587CC l4 GAS DOHC Supercharged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.8121%;\"\u003eToyota MR2 GT Coupe 2-Door\u003c\/td\u003e\n\u003ctd class=\"chevrolet-year\" style=\"width: 11.6493%;\"\u003e1987\u003c\/td\u003e\n\u003ctd class=\"chevrolet-engine\" style=\"width: 38.5211%;\"\u003e1.6L 1587CC l4 GAS DOHC Naturally Aspirated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.8121%;\"\u003eToyota MR2 GT Coupe 2-Door\u003c\/td\u003e\n\u003ctd class=\"chevrolet-year\" style=\"width: 11.6493%;\"\u003e1986\u003c\/td\u003e\n\u003ctd class=\"chevrolet-engine\" style=\"width: 38.5211%;\"\u003e1.6L 1587CC l4 GAS DOHC Naturally Aspirated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 49.8121%;\"\u003eToyota MR2 GT Coupe 2-Door\u003c\/td\u003e\n\u003ctd class=\"chevrolet-year\" style=\"width: 11.6493%;\"\u003e1985\u003c\/td\u003e\n\u003ctd class=\"chevrolet-engine\" style=\"width: 38.5211%;\"\u003e1.6L 1587CC l4 GAS DOHC Naturally Aspirated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"XKVracing","offers":[{"title":"Default Title","offer_id":47887653732522,"sku":"XKV41055","price":233.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/9506\/3722\/files\/0_0011_MT001138_EC46504_41055SAS_Main_Image.webp?v=1769845745"},{"product_id":"1993-1998-stainless-exhaust-header-for-93-98-toyota-supra-3-0l-non-turbo-mk4-na","title":"Stainless Exhaust Header For 1993-1998 Toyota Supra 3.0L Non-Turbo MK4 NA","description":"\u003cdiv class=\"xkv-product-description\"\u003e\n\n  \u003cp\u003e\n    This stainless steel exhaust header is designed for listed 1993–1998 Toyota Supra MK4 3.0L non-turbo applications. It is intended as an exhaust manifold \/ header replacement or upgrade-style component for compatible Supra NA exhaust setups.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    Built from T304 stainless steel with mandrel-bent tubing, CNC-machined flanges, TIG-welded construction, O2 bungs, and 3\/8\" flanges as listed, this header is designed to support a secure exhaust path where compatible. Final fitment, sound, exhaust sealing, drivability, and performance results may vary depending on vehicle condition, exhaust layout, O2 sensor setup, installation quality, emissions setup, and supporting components.\n  \u003c\/p\u003e\n\n  \u003ch3\u003eProduct Overview\u003c\/h3\u003e\n  \u003cp\u003e\n    This product is an exhaust header for compatible Toyota Supra MK4 3.0L non-turbo applications. It is not a turbo manifold, turbo downpipe, catback system, full exhaust system, or universal header kit. Please verify your exact model year, engine configuration, non-turbo fitment, flange layout, O2 sensor position, exhaust connection, and emissions requirements before purchase.\n  \u003c\/p\u003e\n\n  \u003ch3\u003eKey Details\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Listed 1993–1998 Toyota Supra MK4 3.0L non-turbo applications\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Exhaust Header \/ Exhaust Manifold Header\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e T304 stainless steel as listed\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePrimary Pipe Size:\u003c\/strong\u003e 1.50\" as listed\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eOutlet \/ Collector Reference:\u003c\/strong\u003e 2.50\" \/ 2.25\" collector details as listed\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePort Shape:\u003c\/strong\u003e Normal “O” port shape as listed\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePort ID:\u003c\/strong\u003e 1.4\" as listed\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eO2 Bung:\u003c\/strong\u003e 2 O2 bungs as listed\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFlange Thickness:\u003c\/strong\u003e 3\/8\" as listed\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Mandrel-bent tubing with TIG-welded CNC-machined flange as listed\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation highly recommended\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eInstruction:\u003c\/strong\u003e No installation instructions included\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eUse Case:\u003c\/strong\u003e Off-road, racing, or closed-course use where emissions laws apply\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eFitment\u003c\/h3\u003e\n  \u003cp\u003e\n    Please use the table below to quickly confirm the main vehicle application listed for this header. Before ordering, verify your exact model year, engine configuration, non-turbo fitment, exhaust layout, O2 sensor position, and emissions setup.\n  \u003c\/p\u003e\n\n  \u003cdiv class=\"xkv-fitment-table-wrap\"\u003e\n    \u003ctable class=\"xkv-fitment-table\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n          \u003cth\u003eVehicle Name\u003c\/th\u003e\n          \u003cth\u003eYear\u003c\/th\u003e\n          \u003cth\u003eEngine\u003c\/th\u003e\n          \u003cth\u003eNotes\u003c\/th\u003e\n        \u003c\/tr\u003e\n      \u003c\/thead\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eToyota Supra MK4 NA\u003c\/td\u003e\n          \u003ctd\u003e1993–1998\u003c\/td\u003e\n          \u003ctd\u003e3.0L Non-Turbo\u003c\/td\u003e\n          \u003ctd\u003eVerify non-turbo fitment, flange layout, O2 sensor position, and exhaust connection before purchase\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"xkv-fitment-note\"\u003e\n    \u003cstrong\u003eFitment Note:\u003c\/strong\u003e This table is based on the fitment information currently listed for this product. This header is intended for listed Toyota Supra MK4 3.0L non-turbo applications only. It is not listed for turbo applications unless compatibility is independently verified before purchase.\n  \u003c\/div\u003e\n\n  \u003ch3\u003ePackage Includes\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eExhaust header component as shown\u003c\/li\u003e\n    \u003cli\u003eO2 bung provisions as listed\u003c\/li\u003e\n    \u003cli\u003eGaskets, hardware, or additional accessories included only if shown or listed\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\n    Please review the product photos and listing details before installation. Confirm all included components, flanges, gaskets, fasteners, and connection requirements against the received package before beginning installation.\n  \u003c\/p\u003e\n\n  \u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eProfessional installation is highly recommended.\u003c\/li\u003e\n    \u003cli\u003eNo installation instructions are included.\u003c\/li\u003e\n    \u003cli\u003eTest fit the header before final tightening.\u003c\/li\u003e\n    \u003cli\u003eVerify cylinder head flange alignment, gasket seating, O2 sensor position, downstream exhaust connection, and engine bay clearance before installation.\u003c\/li\u003e\n    \u003cli\u003eCheck clearance around the engine bay, steering components, subframe, wiring, heat shields, and surrounding exhaust components.\u003c\/li\u003e\n    \u003cli\u003eOld, rusted, or seized factory hardware may increase installation difficulty.\u003c\/li\u003e\n    \u003cli\u003eModified exhaust systems, engine swaps, previous repairs, or non-factory configurations may require additional adjustment or fabrication.\u003c\/li\u003e\n    \u003cli\u003eInspect all exhaust connections for leaks after installation and recheck fasteners after initial heat cycles where appropriate.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eBefore You Buy\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eThis product is intended for listed 1993–1998 Toyota Supra MK4 3.0L non-turbo applications only.\u003c\/li\u003e\n    \u003cli\u003eThis is an exhaust header, not a turbo manifold, turbo downpipe, catback system, full exhaust system, or universal header kit.\u003c\/li\u003e\n    \u003cli\u003ePlease verify your exact model year, engine configuration, non-turbo fitment, flange layout, O2 sensor position, exhaust connection, and emissions setup before purchase.\u003c\/li\u003e\n    \u003cli\u003eThis product is not listed for turbo applications unless compatibility is independently verified.\u003c\/li\u003e\n    \u003cli\u003eThis product may alter the factory exhaust or emissions-related configuration depending on the vehicle setup.\u003c\/li\u003e\n    \u003cli\u003eThis product is intended for off-road, racing, or closed-course use where emissions laws apply.\u003c\/li\u003e\n    \u003cli\u003eThis product is not represented as street legal, emissions-compliant, CARB-compliant, or legal for public road use unless explicitly stated.\u003c\/li\u003e\n    \u003cli\u003ePerformance gains, sound changes, exhaust flow changes, fitment, and drivability results are not guaranteed and may vary by setup.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n\u003c\/div\u003e\n\n\u003cstyle\u003e\n  .xkv-product-description {\n    font-family: Arial, sans-serif;\n    line-height: 1.5;\n    color: #333;\n  }\n\n  .xkv-product-description h3 {\n    margin-top: 28px;\n    margin-bottom: 12px;\n    color: #062E94;\n    font-size: 20px;\n    font-weight: 700;\n  }\n\n  .xkv-product-description p {\n    margin-bottom: 14px;\n  }\n\n  .xkv-product-description ul {\n    margin: 0 0 18px 20px;\n    padding: 0;\n  }\n\n  .xkv-product-description li {\n    margin-bottom: 8px;\n  }\n\n  .xkv-fitment-table-wrap {\n    width: 100%;\n    overflow-x: auto;\n    margin: 18px 0 20px;\n    border: 1px solid #d9dde5;\n    border-radius: 8px;\n    box-shadow: 0 2px 10px rgba(0,0,0,0.04);\n  }\n\n  .xkv-fitment-table {\n    width: 100%;\n    min-width: 720px;\n    border-collapse: collapse;\n    background: #fff;\n  }\n\n  .xkv-fitment-table th,\n  .xkv-fitment-table td {\n    border-right: 1px solid #e0e0e0;\n    border-top: 1px solid #e5e5e5;\n    padding: 13px 14px;\n    font-size: 15px;\n    line-height: 1.45;\n    text-align: left;\n    color: #444;\n  }\n\n  .xkv-fitment-table th:last-child,\n  .xkv-fitment-table td:last-child {\n    border-right: none;\n  }\n\n  .xkv-fitment-table thead th {\n    background-color: #2f4053;\n    color: #ffffff;\n    font-weight: 700;\n    text-transform: uppercase;\n    border-top: none;\n    border-right: 1px solid #1f2b39;\n  }\n\n  .xkv-fitment-table thead th:last-child {\n    border-right: none;\n  }\n\n  .xkv-fitment-table tbody tr:nth-child(even) {\n    background-color: #fafafa;\n  }\n\n  .xkv-fitment-table tbody tr:hover {\n    background-color: #f5f8fc;\n  }\n\n  .xkv-fitment-note {\n    margin: 14px 0 24px;\n    padding: 14px 16px;\n    background-color: #f8fafd;\n    border-left: 4px solid #062E94;\n    color: #333;\n    font-size: 14px;\n    line-height: 1.65;\n  }\n\n  @media (max-width: 768px) {\n    .xkv-product-description h3 {\n      font-size: 18px;\n    }\n\n    .xkv-product-description p,\n    .xkv-product-description li,\n    .xkv-fitment-table th,\n    .xkv-fitment-table td {\n      font-size: 14px;\n    }\n\n    .xkv-fitment-table th,\n    .xkv-fitment-table td {\n      padding: 11px 12px;\n    }\n\n    .xkv-fitment-table {\n      min-width: 680px;\n    }\n\n    .xkv-fitment-note {\n      font-size: 13px;\n      line-height: 1.6;\n    }\n  }\n\n  @media (max-width: 480px) {\n    .xkv-product-description h3 {\n      font-size: 17px;\n    }\n\n    .xkv-fitment-table {\n      min-width: 660px;\n    }\n  }\n\u003c\/style\u003e","brand":"XKVracing","offers":[{"title":"Default Title","offer_id":47887654650026,"sku":"XKV11156","price":159.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/9506\/3722\/files\/0_0020_MT001126_EH28959X_11156SAS_Main_Image.webp?v=1769844485"},{"product_id":"2020-a90-toyota-supra-b58-4-5-downpipe-exhaust-stainless-steel","title":"2020+ A90 Toyota Supra B58 4.5\"  for Downpipe Exhaust Stainless Steel","description":"\u003cdiv class=\"pr-description\"\u003e\n\u003cp\u003eUpgrade your exhaust system with xkvracing downpipe. These downpipes are made of high quality T-304 stainless steel with computerized mandrel bends i.e. maximizing the smoothest exhaust airflow.\u003c\/p\u003e\n\u003cp\u003eThe downpipe is the pipe that connects the turbocharger to the exhaust system. This tube helps guide exhaust gasses from the car's turbine section into the exhaust system, making sure everything flows smoothly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from hand crafted, tig welded 4.5 inch grade stainless steel.\u003c\/li\u003e\n\u003cli\u003eGains of up to 89wtq when tuned on pump gas.\u003c\/li\u003e\n\u003cli\u003eGains of up to 177WHP when paired with a DME remap.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFits RHD and LHD models with no modification necessary.\u003c\/li\u003e\n\u003cli\u003eSmooth radius bends to decrease turbulence and increase flow.\u003c\/li\u003e\n\u003cli\u003eFits the stock catback as well as all aftermarket catbacks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003efitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eToyota  2020+ 4.5\" B58  Supra A90\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XKVracing","offers":[{"title":"Default Title","offer_id":47887655076010,"sku":"XKV21090","price":108.17,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/9506\/3722\/files\/0_0045_MT001210_21090SAS_Main_Image_No_Color_Box.webp?v=1769843151"},{"product_id":"1974-1982-toyota-corolla-1-8l-3tc-e70-dxl-sr5-stainless-exhaust-header","title":"1974-1982 Toyota Corolla 1.8L 3TC E70 DXL SR5 Stainless Exhaust Header","description":"\u003cdiv class=\"pr-description\"\u003e\n\u003cp\u003eXKVracing headers are the perfect combination of quality and value. our exhaust headers made of high-quality T-304 stainless steel with CNC machine flanges of TIG and MIG welded construction. Computerized Mandrel-Bends bending maximizes the smoothest exhaust airflow for your vehicle and achieves better exhaust gas scavenging and reduced back pressure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeader Inlet \/ Outlet Size (IN): 1.5\" \/ 2.5\"\u003c\/li\u003e\n\u003cli\u003eMade by T-201 ultra lightweight polished stainless steel.\u003c\/li\u003e\n\u003cli\u003eComes with 1 set of 4-1 mandrel bent piping type with C.N.C machined flanges made exhaust header.\u003c\/li\u003e\n\u003cli\u003eNecessary gaskets, bolts and nuts are included.\u003c\/li\u003e\n\u003cli\u003eBetter airflow design. Improves exhaust velocity performance. Offers great flow and higher power gain.\u003c\/li\u003e\n\u003cli\u003eIncreases additional 10-15 horsepower approximately.\u003c\/li\u003e\n\u003cli\u003eProfessional Installation is Highly Recommended (No Instruction Included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1974-1982 Toyota Corolla 1.8L 3T-C E70 Engine\u003c\/li\u003e\n\u003cli\u003eSedan\/Coupe\/Wagon\/Hardtop\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XKVracing","offers":[{"title":"Default Title","offer_id":47887656190122,"sku":"XKV11188","price":144.77,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/9506\/3722\/files\/0_0055_MT001198_11188SAS_Main_Image.webp?v=1769840366"},{"product_id":"1993-1997-toyota-corolla-1-8l-stainless-exhaust-header","title":"1993-1997 Toyota Corolla 1.8L Stainless Exhaust Header","description":"\u003cdiv class=\"pr-description\"\u003e\n\u003cp\u003eXKVracing headers are the perfect combination of quality and value. our exhaust headers made of high-quality T-304 stainless steel with CNC machine flanges of TIG and MIG welded construction. Computerized Mandrel-Bends bending maximizes the smoothest exhaust airflow for your vehicle and achieves better exhaust gas scavenging and reduced back pressure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInlet: 1.5\" \/ 38.1mm\u003c\/li\u003e\n\u003cli\u003eOutlet: 2.0\" \/ 50.8mm\u003c\/li\u003e\n\u003cli\u003eMade of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability\u003c\/li\u003e\n\u003cli\u003eMaximizing the Smoothest High Exhaust Air Flow Rate\u003c\/li\u003e\n\u003cli\u003e4-2-1 High Performance Racing Spec. Design\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTIG Welded CNC Machined Flange and Flex Pipe\u003c\/li\u003e\n\u003cli\u003eIncrease High Flow Air, Instantly Gain 10 -15 Hp. \/ Tq.\u003c\/li\u003e\n\u003cli\u003eProfessional Installation is Highly Recommended\u003c\/li\u003e\n\u003cli\u003eInstallation Instruction is not Included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor 93-97 Toyota Corolla E100\/ AE102\u003c\/li\u003e\n\u003cli style=\"color: rgb(175, 34, 12);\"\u003e\u003cspan style=\"color: rgb(175, 34, 12);\"\u003eFits Models with 1.8L 7A-FE Engines ONLY\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e \u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\u003clink rel=\"stylesheet\" href=\"https:\/\/fonts.googleapis.com\/css2?family=Lato:wght@400;500;600\u0026amp;display=swap\"\u003e\u003c\/p\u003e\n\u003cstyle\u003e\n        .vehicle-specs-container {\n            width: 100%;\n            margin: 0;\n            padding: 0;\n            isolation: isolate;\n        }\n        \n        .vehicle-table-wrapper {\n            overflow-x: auto;\n            background: #fff;\n            border-radius: 8px;\n            box-shadow: 0 2px 8px rgba(0, 0, 0, 0.1);\n            -webkit-overflow-scrolling: touch;\n        }\n        \n        .vehicle-specs-table {\n            width: 100%;\n            border-collapse: collapse;\n            font-family: \"Lato\", -apple-system, BlinkMacSystemFont, \"Segoe UI\", Roboto, Helvetica, Arial, sans-serif;\n            font-size: 12px;\n            line-height: 1.3;\n            table-layout: fixed;\n            min-width: 280px;\n            color: #737272;\n        }\n        \n        .vehicle-specs-table thead {\n            background-color: #2c3e50;\n            color: #fff;\n        }\n        \n        .vehicle-specs-table th {\n            padding: 8px 10px;\n            text-align: left;\n            font-weight: 600;\n            font-size: 12px;\n        }\n        \n        .vehicle-specs-table td {\n            padding: 8px 10px;\n            border-bottom: 1px solid #eaeaea;\n            word-wrap: break-word;\n        }\n        \n        .vehicle-specs-table tbody tr:last-child td {\n            border-bottom: none;\n        }\n        \n        .vehicle-year {\n            color: #737272;\n            font-weight: 500;\n            width: 20%;\n        }\n        \n        .vehicle-engine {\n            color: #737272;\n            font-weight: 500;\n            width: 30%;\n        }\n        \n        .vehicle-specs-table th:first-child,\n        .vehicle-specs-table td:first-child {\n            width: 50%;\n        }\n        \n        @media (max-width: 480px) {\n            .vehicle-specs-table {\n                font-size: 11px;\n            }\n            \n            .vehicle-specs-table th,\n            .vehicle-specs-table td {\n                padding: 6px 8px;\n            }\n            \n            .vehicle-specs-table th:first-child,\n            .vehicle-specs-table td:first-child {\n                width: 45%;\n            }\n            \n            .vehicle-year {\n                width: 25%;\n            }\n            \n            .vehicle-engine {\n                width: 30%;\n            }\n        }\n        \n        @media (max-width: 360px) {\n            .vehicle-specs-table {\n                font-size: 10px;\n            }\n            \n            .vehicle-specs-table th,\n            .vehicle-specs-table td {\n                padding: 5px 6px;\n            }\n        }\n    \u003c\/style\u003e\n\u003cdiv class=\"vehicle-specs-container\"\u003e\n\u003cdiv class=\"vehicle-table-wrapper\"\u003e\n\u003ctable class=\"vehicle-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eVEHICLE NAME\u003c\/th\u003e\n\u003cth\u003eYEAR\u003c\/th\u003e\n\u003cth\u003eENGINE\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eToyota Corolla\u003c\/td\u003e\n\u003ctd class=\"vehicle-year\"\u003e1993~1997\u003c\/td\u003e\n\u003ctd class=\"vehicle-engine\"\u003e1.8L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"XKVracing","offers":[{"title":"Default Title","offer_id":47887656353962,"sku":"XKV11185","price":121.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/9506\/3722\/files\/0_0059_MT001193_11185SAS_Main_Image.webp?v=1769839904"},{"product_id":"1990-1995-exhaust-header-manifold-with-downpipe-kit-for-90-95-toyota-pickup-4runner-2-4l-22re-4wd","title":"Exhaust Header Manifold with Downpipe Kit for 90-95 Toyota Pickup 4Runner 2.4L 22RE 4WD","description":"\u003cdiv class=\"xkv-product-description\"\u003e\n\n  \u003cp\u003e\n    This exhaust header manifold and downpipe kit is designed for listed 1990–1995 Toyota Pickup and 4Runner 2.4L 22RE 4WD applications. It combines a header-style exhaust manifold section with a matching downpipe component for compatible Toyota 22RE exhaust setups.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    Built from stainless steel with CNC-machined flanges, TIG\/MIG welded construction, and 16-gauge wall piping as listed, this kit is intended as a replacement or upgrade option for compatible vehicles. Final fitment, sound, exhaust sealing, drivability, and performance results may vary depending on vehicle condition, installation quality, emissions setup, and supporting components.\n  \u003c\/p\u003e\n\n  \u003ch3\u003eProduct Overview\u003c\/h3\u003e\n  \u003cp\u003e\n    This product is a header manifold with downpipe kit for compatible Toyota 2.4L 22RE 4WD applications. It is not a universal exhaust kit and is not intended for all Toyota Pickup or 4Runner models. Please verify your exact year, engine, drivetrain, flange connection, downpipe layout, and emissions requirements before purchase.\n  \u003c\/p\u003e\n\n  \u003ch3\u003eKey Details\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Listed 1990–1995 Toyota Pickup \/ 4Runner 2.4L 22RE 4WD applications\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Exhaust Header Manifold with Downpipe Kit\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Stainless Steel\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e CNC-machined flanges with TIG\/MIG welded construction as listed\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePipe Wall:\u003c\/strong\u003e 16-gauge wall piping as listed\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eInlet \/ Outlet:\u003c\/strong\u003e 1-1\/2\" OD \/ 2-1\/4\" OD\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eColor \/ Finish:\u003c\/strong\u003e Black as listed\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Header with downpipe, gaskets, and bolts as listed\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation recommended\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eInstruction:\u003c\/strong\u003e No installation instructions included; refer to a shop or factory manual for installation\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eFitment\u003c\/h3\u003e\n  \u003cp\u003e\n    Please use the table below to quickly confirm the main vehicle applications listed for this header and downpipe kit. Before ordering, verify your exact model year, engine, drivetrain, exhaust connection, and emissions configuration.\n  \u003c\/p\u003e\n\n  \u003cdiv class=\"xkv-fitment-table-wrap\"\u003e\n    \u003ctable class=\"xkv-fitment-table\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n          \u003cth\u003eVehicle Name\u003c\/th\u003e\n          \u003cth\u003eYear\u003c\/th\u003e\n          \u003cth\u003eEngine\u003c\/th\u003e\n          \u003cth\u003eNotes\u003c\/th\u003e\n        \u003c\/tr\u003e\n      \u003c\/thead\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eToyota Pickup\u003c\/td\u003e\n          \u003ctd\u003e1990–1995\u003c\/td\u003e\n          \u003ctd\u003e2.4L 22RE\u003c\/td\u003e\n          \u003ctd\u003eFor listed 4WD applications; verify exhaust layout before purchase\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eToyota 4Runner\u003c\/td\u003e\n          \u003ctd\u003e1990–1995\u003c\/td\u003e\n          \u003ctd\u003e2.4L 22RE\u003c\/td\u003e\n          \u003ctd\u003eFor listed 4WD applications; verify exhaust layout before purchase\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"xkv-fitment-note\"\u003e\n    \u003cstrong\u003eFitment Note:\u003c\/strong\u003e This table is based on the fitment information currently listed for this product. Please verify your exact vehicle, 2.4L 22RE engine, 4WD configuration, flange connection, downpipe layout, emissions equipment, and surrounding clearance before purchase.\n  \u003c\/div\u003e\n\n  \u003ch3\u003ePackage Includes\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eExhaust header manifold component as shown\u003c\/li\u003e\n    \u003cli\u003eDownpipe component as shown\u003c\/li\u003e\n    \u003cli\u003eGaskets included as listed\u003c\/li\u003e\n    \u003cli\u003eBolts \/ hardware included as listed\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\n    Please review the product photos and listing details before installation. Confirm all included components, gaskets, and hardware against the received package before beginning installation.\n  \u003c\/p\u003e\n\n  \u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eProfessional installation is recommended.\u003c\/li\u003e\n    \u003cli\u003eNo installation instructions are included; refer to a shop or factory service manual for installation.\u003c\/li\u003e\n    \u003cli\u003eTest fit all components before final tightening.\u003c\/li\u003e\n    \u003cli\u003eVerify flange alignment, gasket seating, downpipe routing, and exhaust connection points before installation.\u003c\/li\u003e\n    \u003cli\u003eCheck clearance around the engine bay, frame, suspension, steering components, transmission area, and surrounding exhaust parts.\u003c\/li\u003e\n    \u003cli\u003eOld, rusted, or seized factory hardware may increase installation difficulty.\u003c\/li\u003e\n    \u003cli\u003eInspect for exhaust leaks after installation and recheck fasteners after initial heat cycles where appropriate.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eBefore You Buy\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eThis product is intended for listed 1990–1995 Toyota Pickup \/ 4Runner 2.4L 22RE 4WD applications only.\u003c\/li\u003e\n    \u003cli\u003eThis is a header manifold with downpipe kit, not a full exhaust system or universal exhaust kit.\u003c\/li\u003e\n    \u003cli\u003ePlease verify your exact model year, engine, drivetrain, flange connection, downpipe layout, and emissions setup before purchase.\u003c\/li\u003e\n    \u003cli\u003eThis product may alter the factory exhaust or emissions-related configuration depending on the vehicle setup.\u003c\/li\u003e\n    \u003cli\u003eThis product is intended for off-road or racing use where emissions laws apply.\u003c\/li\u003e\n    \u003cli\u003eThis product is not represented as street legal, emissions-compliant, or CARB-compliant unless explicitly stated.\u003c\/li\u003e\n    \u003cli\u003ePerformance gains, sound changes, exhaust flow changes, fitment, and drivability results are not guaranteed and may vary by setup.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n\u003c\/div\u003e\n\n\u003cstyle\u003e\n  .xkv-product-description {\n    font-family: Arial, sans-serif;\n    line-height: 1.5;\n    color: #333;\n  }\n\n  .xkv-product-description h3 {\n    margin-top: 28px;\n    margin-bottom: 12px;\n    color: #062E94;\n    font-size: 20px;\n    font-weight: 700;\n  }\n\n  .xkv-product-description p {\n    margin-bottom: 14px;\n  }\n\n  .xkv-product-description ul {\n    margin: 0 0 18px 20px;\n    padding: 0;\n  }\n\n  .xkv-product-description li {\n    margin-bottom: 8px;\n  }\n\n  .xkv-fitment-table-wrap {\n    width: 100%;\n    overflow-x: auto;\n    margin: 18px 0 20px;\n    border: 1px solid #d9dde5;\n    border-radius: 8px;\n    box-shadow: 0 2px 10px rgba(0,0,0,0.04);\n  }\n\n  .xkv-fitment-table {\n    width: 100%;\n    min-width: 720px;\n    border-collapse: collapse;\n    background: #fff;\n  }\n\n  .xkv-fitment-table th,\n  .xkv-fitment-table td {\n    border-right: 1px solid #e0e0e0;\n    border-top: 1px solid #e5e5e5;\n    padding: 13px 14px;\n    font-size: 15px;\n    line-height: 1.45;\n    text-align: left;\n    color: #444;\n  }\n\n  .xkv-fitment-table th:last-child,\n  .xkv-fitment-table td:last-child {\n    border-right: none;\n  }\n\n  .xkv-fitment-table thead th {\n    background-color: #2f4053;\n    color: #ffffff;\n    font-weight: 700;\n    text-transform: uppercase;\n    border-top: none;\n    border-right: 1px solid #1f2b39;\n  }\n\n  .xkv-fitment-table thead th:last-child {\n    border-right: none;\n  }\n\n  .xkv-fitment-table tbody tr:nth-child(even) {\n    background-color: #fafafa;\n  }\n\n  .xkv-fitment-table tbody tr:hover {\n    background-color: #f5f8fc;\n  }\n\n  .xkv-fitment-note {\n    margin: 14px 0 24px;\n    padding: 14px 16px;\n    background-color: #f8fafd;\n    border-left: 4px solid #062E94;\n    color: #333;\n    font-size: 14px;\n    line-height: 1.65;\n  }\n\n  @media (max-width: 768px) {\n    .xkv-product-description h3 {\n      font-size: 18px;\n    }\n\n    .xkv-product-description p,\n    .xkv-product-description li,\n    .xkv-fitment-table th,\n    .xkv-fitment-table td {\n      font-size: 14px;\n    }\n\n    .xkv-fitment-table th,\n    .xkv-fitment-table td {\n      padding: 11px 12px;\n    }\n\n    .xkv-fitment-table {\n      min-width: 680px;\n    }\n\n    .xkv-fitment-note {\n      font-size: 13px;\n      line-height: 1.6;\n    }\n  }\n\n  @media (max-width: 480px) {\n    .xkv-product-description h3 {\n      font-size: 17px;\n    }\n\n    .xkv-fitment-table {\n      min-width: 660px;\n    }\n  }\n\u003c\/style\u003e","brand":"XKVracing","offers":[{"title":"Default Title","offer_id":47887657402538,"sku":"XKV11142","price":134.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/9506\/3722\/files\/0_0000_MT001093_EH28974_11142SAS_Main_Image.webp?v=1769838158"},{"product_id":"1975-1980-stainless-steel-exhaust-header-with-downpipe-kit-for-75-80-toyota-pickup-celica-hilux-2-2l-sohc","title":"Stainless Steel Exhaust Header with Downpipe Kit For 1975-1980 Toyota Pickup Celica, For 1975-1983 Hilux 2WD 4WD 2.2L SOHC","description":"\u003cdiv class=\"xkv-product-description\"\u003e\n\n  \u003cp\u003e\n    This stainless steel exhaust header with downpipe kit is designed for listed 1975–1980 Toyota Pickup \/ Celica and 1975–1983 Toyota Hilux 2.2L SOHC applications. It is intended as an exhaust header and downpipe replacement or upgrade-style kit for compatible Toyota 2.2L SOHC exhaust setups.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    Built from T304 stainless steel with 1.5\" primary tubes, 2.5\" output, one O2 sensor location, 4-2-1 lightweight design, CNC-machined flanges, TIG\/MIG welded construction, and polished finish as listed, this kit is designed to support a secure exhaust path where compatible. Final fitment, sound, exhaust sealing, clearance, drivability, and performance results may vary depending on vehicle condition, 2WD \/ 4WD layout, exhaust setup, O2 sensor configuration, installation quality, emissions setup, and supporting components.\n  \u003c\/p\u003e\n\n  \u003ch3\u003eProduct Overview\u003c\/h3\u003e\n  \u003cp\u003e\n    This product is an exhaust header with downpipe kit for compatible Toyota 2.2L SOHC applications. It is not a universal header kit, catback exhaust system, turbo manifold, full exhaust system, or standalone downpipe. Please verify your exact model year, vehicle model, engine, 2WD \/ 4WD configuration, O2 sensor position, torsion bar clearance, downpipe connection, and emissions requirements before purchase.\n  \u003c\/p\u003e\n\n  \u003ch3\u003eKey Details\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e Listed 1975–1980 Toyota Pickup \/ Celica and 1975–1983 Toyota Hilux 2.2L SOHC applications\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Exhaust Header with Downpipe Kit\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e T304 stainless steel as listed\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePrimary Tubes:\u003c\/strong\u003e 1.5\" as listed\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 2.5\" as listed\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eO2 Sensor Location:\u003c\/strong\u003e One O2 sensor location as listed\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHeader Design:\u003c\/strong\u003e 4-2-1 lightweight design as listed\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e CNC-machined flanges with TIG\/MIG welded construction as listed\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e 3-stage polished finish as listed\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eImportant Fitment Note:\u003c\/strong\u003e Hilux 2WD models require modification as listed due to torsion bar interference\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Professional installation highly recommended\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eInstruction:\u003c\/strong\u003e Installation instruction not included as listed\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eUse Case:\u003c\/strong\u003e Off-road, racing, or closed-course use where emissions laws apply\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eFitment\u003c\/h3\u003e\n  \u003cp\u003e\n    Please use the table below to quickly confirm the main vehicle applications listed for this header and downpipe kit. Before ordering, verify your exact model year, engine, 2WD \/ 4WD layout, O2 sensor position, torsion bar clearance, downpipe connection, and emissions setup.\n  \u003c\/p\u003e\n\n  \u003cdiv class=\"xkv-fitment-table-wrap\"\u003e\n    \u003ctable class=\"xkv-fitment-table\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n          \u003cth\u003eVehicle Name\u003c\/th\u003e\n          \u003cth\u003eYear\u003c\/th\u003e\n          \u003cth\u003eEngine\u003c\/th\u003e\n          \u003cth\u003eNotes\u003c\/th\u003e\n        \u003c\/tr\u003e\n      \u003c\/thead\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eToyota Celica\u003c\/td\u003e\n          \u003ctd\u003e1975–1980\u003c\/td\u003e\n          \u003ctd\u003e2.2L SOHC\u003c\/td\u003e\n          \u003ctd\u003eVerify model year, exhaust flange layout, O2 sensor position, and downstream connection\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eToyota Pickup\u003c\/td\u003e\n          \u003ctd\u003e1975–1980\u003c\/td\u003e\n          \u003ctd\u003e2.2L SOHC\u003c\/td\u003e\n          \u003ctd\u003eVerify exact truck configuration, exhaust layout, and downpipe connection\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eToyota Hilux 4WD\u003c\/td\u003e\n          \u003ctd\u003e1975–1983\u003c\/td\u003e\n          \u003ctd\u003e2.2L SOHC\u003c\/td\u003e\n          \u003ctd\u003eVerify 4WD configuration, clearance, O2 sensor position, and exhaust connection\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eToyota Hilux 2WD\u003c\/td\u003e\n          \u003ctd\u003e1975–1983\u003c\/td\u003e\n          \u003ctd\u003e2.2L SOHC\u003c\/td\u003e\n          \u003ctd\u003eRequires modification as listed; torsion bar may interfere with the header\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"xkv-fitment-note\"\u003e\n    \u003cstrong\u003eFitment Note:\u003c\/strong\u003e This table is based on the fitment information currently listed for this product. Hilux 2WD applications require modification as listed because the torsion bar may interfere with the header. Please verify your exact model year, 2WD \/ 4WD layout, 2.2L SOHC engine, O2 sensor location, torsion bar clearance, downpipe routing, downstream exhaust connection, and emissions setup before purchase.\n  \u003c\/div\u003e\n\n  \u003ch3\u003ePackage Includes\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eExhaust header component as shown\u003c\/li\u003e\n    \u003cli\u003eDownpipe component \/ section as shown or listed\u003c\/li\u003e\n    \u003cli\u003eO2 sensor location provision as listed\u003c\/li\u003e\n    \u003cli\u003eFlange \/ welded connection sections as shown or listed\u003c\/li\u003e\n    \u003cli\u003eGaskets, hardware, bolts, or additional accessories included only if shown or listed\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\n    Please review the product photos and listing details before installation. Confirm all included header, downpipe, flange, gasket, O2 sensor provision, fastener, and connection components against the received package before beginning installation.\n  \u003c\/p\u003e\n\n  \u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eProfessional installation is highly recommended.\u003c\/li\u003e\n    \u003cli\u003eInstallation instruction is not included as listed.\u003c\/li\u003e\n    \u003cli\u003eTest fit the header and downpipe before final tightening.\u003c\/li\u003e\n    \u003cli\u003eVerify cylinder head flange alignment, gasket seating, O2 sensor position, downpipe routing, and downstream exhaust compatibility before installation.\u003c\/li\u003e\n    \u003cli\u003eFor Hilux 2WD models, modification may be required because the torsion bar may interfere with the header as listed.\u003c\/li\u003e\n    \u003cli\u003eCheck clearance around the torsion bar, steering components, frame, transmission, suspension components, wiring, heat shields, and surrounding exhaust components.\u003c\/li\u003e\n    \u003cli\u003eOld, rusted, or seized factory hardware may increase installation difficulty.\u003c\/li\u003e\n    \u003cli\u003eModified exhaust systems, previous repairs, engine swaps, or non-factory configurations may require additional adjustment or fabrication.\u003c\/li\u003e\n    \u003cli\u003eInspect all exhaust connections for leaks after installation and recheck fasteners after initial heat cycles where appropriate.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eBefore You Buy\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eThis product is intended for listed Toyota Pickup, Celica, and Hilux 2.2L SOHC applications only.\u003c\/li\u003e\n    \u003cli\u003eThis is an exhaust header with downpipe kit, not a universal header kit, catback exhaust system, turbo manifold, full exhaust system, or standalone downpipe.\u003c\/li\u003e\n    \u003cli\u003ePlease verify your exact model year, vehicle model, engine, 2WD \/ 4WD configuration, O2 sensor position, downpipe connection, torsion bar clearance, and emissions setup before purchase.\u003c\/li\u003e\n    \u003cli\u003eHilux 2WD models require modification as listed due to torsion bar interference.\u003c\/li\u003e\n    \u003cli\u003eFitment may vary by vehicle condition, factory exhaust layout, previous repairs, and installed exhaust modifications.\u003c\/li\u003e\n    \u003cli\u003eThis product may alter the factory exhaust or emissions-related configuration depending on the vehicle setup.\u003c\/li\u003e\n    \u003cli\u003eThis product is intended for off-road, racing, or closed-course use where emissions laws apply.\u003c\/li\u003e\n    \u003cli\u003eThis product is not represented as street legal, emissions-compliant, CARB-compliant, or legal for public road use unless explicitly stated.\u003c\/li\u003e\n    \u003cli\u003ePerformance gains, sound changes, exhaust flow changes, fitment, clearance, and drivability results are not guaranteed and may vary by setup.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n\u003c\/div\u003e\n\n\u003cstyle\u003e\n  .xkv-product-description {\n    font-family: Arial, sans-serif;\n    line-height: 1.5;\n    color: #333;\n  }\n\n  .xkv-product-description h3 {\n    margin-top: 28px;\n    margin-bottom: 12px;\n    color: #062E94;\n    font-size: 20px;\n    font-weight: 700;\n  }\n\n  .xkv-product-description p {\n    margin-bottom: 14px;\n  }\n\n  .xkv-product-description ul {\n    margin: 0 0 18px 20px;\n    padding: 0;\n  }\n\n  .xkv-product-description li {\n    margin-bottom: 8px;\n  }\n\n  .xkv-fitment-table-wrap {\n    width: 100%;\n    overflow-x: auto;\n    margin: 18px 0 20px;\n    border: 1px solid #d9dde5;\n    border-radius: 8px;\n    box-shadow: 0 2px 10px rgba(0,0,0,0.04);\n  }\n\n  .xkv-fitment-table {\n    width: 100%;\n    min-width: 720px;\n    border-collapse: collapse;\n    background: #fff;\n  }\n\n  .xkv-fitment-table th,\n  .xkv-fitment-table td {\n    border-right: 1px solid #e0e0e0;\n    border-top: 1px solid #e5e5e5;\n    padding: 13px 14px;\n    font-size: 15px;\n    line-height: 1.45;\n    text-align: left;\n    color: #444;\n  }\n\n  .xkv-fitment-table th:last-child,\n  .xkv-fitment-table td:last-child {\n    border-right: none;\n  }\n\n  .xkv-fitment-table thead th {\n    background-color: #2f4053;\n    color: #ffffff;\n    font-weight: 700;\n    text-transform: uppercase;\n    border-top: none;\n    border-right: 1px solid #1f2b39;\n  }\n\n  .xkv-fitment-table thead th:last-child {\n    border-right: none;\n  }\n\n  .xkv-fitment-table tbody tr:nth-child(even) {\n    background-color: #fafafa;\n  }\n\n  .xkv-fitment-table tbody tr:hover {\n    background-color: #f5f8fc;\n  }\n\n  .xkv-fitment-note {\n    margin: 14px 0 24px;\n    padding: 14px 16px;\n    background-color: #f8fafd;\n    border-left: 4px solid #062E94;\n    color: #333;\n    font-size: 14px;\n    line-height: 1.65;\n  }\n\n  @media (max-width: 768px) {\n    .xkv-product-description h3 {\n      font-size: 18px;\n    }\n\n    .xkv-product-description p,\n    .xkv-product-description li,\n    .xkv-fitment-table th,\n    .xkv-fitment-table td {\n      font-size: 14px;\n    }\n\n    .xkv-fitment-table th,\n    .xkv-fitment-table td {\n      padding: 11px 12px;\n    }\n\n    .xkv-fitment-table {\n      min-width: 680px;\n    }\n\n    .xkv-fitment-note {\n      font-size: 13px;\n      line-height: 1.6;\n    }\n  }\n\n  @media (max-width: 480px) {\n    .xkv-product-description h3 {\n      font-size: 17px;\n    }\n\n    .xkv-fitment-table {\n      min-width: 660px;\n    }\n  }\n\u003c\/style\u003e","brand":"XKVracing","offers":[{"title":"Default Title","offer_id":47887657500842,"sku":"XKV11141","price":172.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/9506\/3722\/files\/0_0018_MT001092_EH28951X_11141SAS.webp?v=1769837861"},{"product_id":"toyota-4runner-pickup-3-0l-v6-exhaust-manifold-header-1988-1995-replacement-for-3vze-engine","title":"Toyota  Exhaust Manifold Header for 1988-1995 4Runner Pickup 3.0L V6","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e XKVracing\u003cspan\u003e \u003c\/span\u003eheaders are the perfect combination of quality and value. our exhaust headers made of high-quality T-304 stainless steel with CNC machine flanges of TIG and MIG welded construction. Computerized Mandrel-Bends bending maximizes the smoothest exhaust airflow for your vehicle and achieves better exhaust gas scavenging and reduced back pressure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeader features 6-2-1 piping design\u003c\/li\u003e\n\u003cli\u003eEGR locations: 2\u003c\/li\u003e\n\u003cli\u003e1.50\" Inlet\u003c\/li\u003e\n\u003cli\u003e2.25\" Outlet\u003c\/li\u003e\n\u003cli\u003eCNC machine flanges with TIG and MIG welded construction\u003c\/li\u003e\n\u003cli\u003eHP\/Torque Gains of 10-15\u003c\/li\u003e\n\u003cli\u003eProfessional Installation is Highly Recommended\u003c\/li\u003e\n\u003cli\u003eNo Instruction Included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eToyota 4Runner 1988-1995 3.0L V6\u003c\/li\u003e\n\u003cli\u003eToyota Pickup 1988-1995 3.0L V6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable data-extentions-extra-tablecapture-id=\"986914\" border=\"1\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth class=\"make-model\"\u003eVEHICLE NAME\u003c\/th\u003e\n\u003cth class=\"year\"\u003eYear\u003c\/th\u003e\n\u003cth class=\"engine\"\u003eEngine\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eToyota 4Runner\u003c\/td\u003e\n\u003ctd\u003e1988~1995\u003c\/td\u003e\n\u003ctd\u003e2.4L|3.0L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eToyota Pickup\u003c\/td\u003e\n\u003ctd\u003e1988~1995\u003c\/td\u003e\n\u003ctd\u003e2.4L|3.0L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"XKVracing","offers":[{"title":"Default Title","offer_id":47887659761834,"sku":"XKV11073","price":236.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/9506\/3722\/files\/0_0089_MT001023-EH28910-11073SAS_Main_lmage.webp?v=1769825228"},{"product_id":"1995-2001-toyota-tacoma-2-4l-2-7l-tri-y-header-performance-exhaust-for-2dr-rwd-models-2rz-3rz-engine","title":"1995-2001 Tri-Y Exhaust Header for Toyota Tacoma 2.4L 2.7L L4 2DR RWD","description":"\u003cdiv class=\"pr-description\"\u003e\n\u003cp\u003eXKVracing headers are the perfect combination of quality and value. our exhaust headers made of high-quality T-304 stainless steel with CNC machine flanges of TIG and MIG welded construction. Computerized Mandrel-Bends bending maximizes the smoothest exhaust airflow for your vehicle and achieves better exhaust gas scavenging and reduced back pressure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInlet: 1.5 OD \/ Outlet: 2.5 OD\u003c\/li\u003e\n\u003cli\u003eMade of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTIG Welded CNC Machine Flange\u003c\/li\u003e\n\u003cli\u003eProfessional installation is highly recommended\u003c\/li\u003e\n\u003cli\u003eInstallation Instruction is NOT Included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003e  Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1995-2001 Toyota Tacoma 2.4L\/2.7L L4\u003c\/li\u003e\n\u003cli\u003eFor RWD version only\u003c\/li\u003e\n\u003cli\u003eDoesn't fit 4X4\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XKVracing","offers":[{"title":"Default Title","offer_id":47887660810410,"sku":"XKV11124","price":132.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/9506\/3722\/files\/0_0036_MT001075-EH28915X-11124SAS_Main_image_2.webp?v=1769762221"},{"product_id":"2000-2004-toyota-tundra-sequoia-4-7l-2uz-fe-v8-headers-stainless-steel-performance-exhaust-direct-bolt-on","title":"Toyota For 2000-2004  Tundra Sequoia 4.7L V8 Stainless Steel Manifold Headers","description":"\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e100% Brand New Items, Never Used Or Installed\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFeatures 1.75\" Primary Tubes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1.5\" Inlet and 2.25\" Outlet\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMade from true T-304 Stainless steel with CNC machine flanges with TIG and MIG welded construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eProfessional Installation is Highly Recommended \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNo Instruction Included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003e  Fitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eToyota Tundra 2000-2004 4.7L V8 2UZ-FE Engines\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eToyota Sequioa 2000-2004 4.7L V8 2UZ-FE Engines\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFor Year and Model, Please Check Compatibility\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"XKVracing","offers":[{"title":"Default Title","offer_id":47887661957290,"sku":"XKV11103","price":148.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0690\/9506\/3722\/files\/0_0057_MT001054-EH28678-11103SAS_Main_image.webp?v=1769760440"}],"url":"https:\/\/xkvracing.com\/collections\/toyota.oembed?page=2","provider":"XKVracing","version":"1.0","type":"link"}